SECTION 2
ASSEMBLE/INSTALL PRINTER
16
Install Printer Driver
The Printer Driver can be installed on the Top Printer using the
USB
connection or the
Network
connection. For
Network
connection, there are two ways to install the Driver: Using
Auto IP
(
network automatically assigns the IP
address, this is the default
). Using
Static IP
(
the IP address is entered manually
). For
Auto IP
, use
Network
Version A
. For
Static IP
, use
Network Version B
.
For Printer software to operate properly, check that computer system meets
minimum requirements:
Operating System:
Windows 8/8.1, Windows 10 (
Desktop Mode only
). Windows XP, Windows Vista,
Windows 7. Supports 32 and 64 bit systems. (
You must have administrative privileges on system
.)
NOTE:
Win 8, 8.1 and Windows 10 will only work in desktop mode. No Win 8 or 10 metro apps will be
supported (
applications that only work in a Windows 8 or 10 environment
).
Microprocessor:
Pentium II, 2 GHz minimum (
Pentium Dual Core, 2.5 GHz or better, is optimal
)
System memory:
2 GB minimum; or as recommended for your operating system.
Free hard-disk space:
At least 10 GB.
Web Browser:
Firefox recommended; Chrome, Safari, and Opera also supported.
CD/DVD drive.
USB port (2.0/3.0):
(
Ports will be identified as “USB” or “Enhanced” in Device Manager
)
Microsoft .Net Framework version 3.5 (
for 32 bit systems
) or Microsoft .Net Framework version 4 (
for 64 bit
systems
) must be installed.
NOTE:
Even if a higher .NET Framework version is installed; version 3.5 or 4 must
also be installed, or Toolbox will not open.
IMPORTANT:
Before installing Printer software (
Toolbox and Driver
),
temporarily disable all antivirus
programs and firewalls
. In addition, you must be logged onto system with full administrative privileges
(
admin rights
).
NOTE:
If installing over USB,
do not plug in USB cable until prompted
.
Install Over USB Connection
This is the procedure for installing the Print Driver over the USB connection. The procedures for installing the Print
Driver over a network connection follow.
1.
Check that the
Top Printer
is plugged in and turned OFF.
Disconnect USB connection if already plugged in.
NOTE: Duplex Printer should not be connected to the Top
Printer at this time.
Install disk supplied with the Duplex Printer in your CD drive.
When
AutoPlay
Window opens, click
“Run Setup.exe”
to start.
2.
Install Printer Software.
Make sure computer system
meets
minimum requirements
and you followed other
instructions listed on screen.
Click
“Install Printer Software”
.
Содержание M1DX
Страница 6: ......
Страница 96: ......
Страница 97: ...Copyright 2016 ASTRO MACHINE CORP Elk Grove Village IL 60007 09 22 2016 Part Number 200 M1DX ...
