Astro Machine AstroJet L1, Руководство оператора

Страница: 7 / 86

SECTION 1
GETTING ACQUAINTED
1
SECTION 1 – Getting Acquainted
Front View
1.
Control Panel Touchscreen
– Displays
Menu and information about Printer status.
Controls Printer functions and set-up.
2.
Top Cover
– Provides access to Print Engine, Printhead and Service Station.
3.
ON/OFF LED Button
– Turn power ON or OFF during idle time and maintenance.
4.
SD Card USB Port
–
Use this port to back-up the Printer's SD card to a USB memory
stick including any saved Print Jobs in the Printer Job Library and Printer Debug Logs
for service personnel or archiving. Upload Print Jobs from other sources and printers.
5.
Clamshell
– Holds upper section of Print Engine including Printhead and Service
Station. Lifts up to clear media path.
6.
Ink Vapor Exhaust Fan
– Draws ink vapor out of the Print Area and away from the
Exit Sensor.
7.
Cutter Assembly
– Cuts media after each piece or at end of job.
8.
Fixed and Adjustable Exit Media Guides
– Loosen and tighten knob to slide
Adjustable Exit Guide to accommodate different media widths and keep media aligned
as it exits the Printer.
9.
Ink Tank Door
– Access to Ink Tanks. When open, disconnects Printer communication
to Ink Tanks and allows safe installation and replacement.
10.
Ink Tanks
– Printer has five Ink Tanks: Cyan, Yellow, Magenta, and two Black.
11.
Ink Waste Tray
– Catches any waste ink produced by system. Tray is filled with
absorbent material. Pull on tab to remove Tray.
12.
Ink Tank Latches
– Used to hold Ink Tanks in slots.
NOTE : Make sure both sides at bottom part of latch are engaged.
13.
Adjustable Media Guide
– Adjusts to hold media against Media and Alignment Guides.
14.
Clamshell Latch
– Release to raise the Printhead Assembly.