Astro Machine AstroJet L1, Руководство оператора

Страница: 45 / 86

SECTION 3
OPERATING PRINTER
39
CONTROL BUTTONS ( located along bottom of screen ): Provide quick access to often-used functions.
Pause/Resume: Tap to temporarily stop printing. Tap again to resume printing.
Cancel Job: Cancels a paused job from the printing queue. Cancel is unavailable unless the Pause button has
been pressed first. NOTE: Cancelled jobs must be reloaded before printing can resume.
Clear Error . Click the button to clear error messages after you have resolved Printer problem ( ie, after clearing
a paper jam ).
User Interface
SET-UP SETTINGS:
Adjust the Printer for automated
service and cleaning intervals, for
different types of media and to set
the feeder speed for a job.
Mid-Job Servicing – Sets how
frequently an automatic
maintenance cycle is performed
by selecting the length of printed
media (
in meters ) that is run
between cycles.
Minimum: 60m/197-ft.
Normal ( Default ): 40m/131-ft.
Maximum: 15m /49.25-ft.
NOTE: Mid-Job Servicing can
only be set when the Printer is
stopped or paused.
KWS Setting – ( Keep Wet Spitting ) Keeps Printhead hydrated while running a job.
Select from 4 settings: None , Light , Medium ( default ), and Heavy
to determine how much ink will “spit” from
Printhead Nozzles. Set in conjunction with
“Mid-Job Servicing”
which determines frequency of Printer stopping
for self-servicing during a job.
Interpage Frequency
– On roll-to-cut jobs, set when the Printer spits between labels (
to keep the Printhead
nozzles hydrated and unclogged ). For example: 3 = after every 3
rd
label; 5 = after every 5
th
label, etc.
Idle Timeout (min)
– Set in minutes how often idle maintenance will run when the Printer is not running.
Media Feed – Sets the Printer Sensors to read the type of media and/or the gaps between media when you select
Continuous, Diecut or Blackmark .
Internal Print Job Cut
– Checking this box allows you to print and cut one of the reports or test pages listed in
the Print dropdown menu.
Print Height
– Set the height of the Printhead to adjust for printing on different media thicknesses. Select one of
three settings: High, Normal, Low . An indicator appears on the Status Toolbox screen and Touchscreen.
Click
“Submit”
to apply settings.