Astro Machine AstroJet L1, Руководство оператора

Страница: 40 / 86

SECTION 3
OPERATING PRINTER
34
5. Tap Auto Scan . The Touchscreen will
display a graph together with results
marked
Legend and Edge Distances .
The graph shows the difference between
the high points ( gaps/backing ) and flats
( label media ). If there is little difference
between the highs and the flats, the Printer
may have trouble differentiating the labels
from the gaps.
NOTE: Tapping or r olling the cursor
over the blue graph line provides
readouts of the points on the graph
.
Legend: Explains what the graph is
showing. Media ( TOF/BOF-Green line )
and Sensor ( Sensor-Blue line ).
Edge Distances:
Top line shows the
average gap distance
reading.
Bottom line
shows the length of
the label reading.
This example uses a
1/8" (3.5mm)
blackmark or gap with
a 4" (101.6mm) long
label.
6. Manual Scan: For Advanced Users Only. Use Manual Scan if you wish to fine tune the results of the
Auto Scan . First, make sure that the label type and the selected Touchscreen label icon match. Only the
sensors for that type of media will be active. If the label type is different, an Error will show on the
Touchscreen status box. Adjust the Sensor Power and/or Sensor Sensitivity sliders in very small
increments. You can also increase or decrease the length of media to be scanned by moving the slider on
the
Scan Length bar. Tap the Manual Scan button. Repeat as necessary to get the desired result.
Sensor Power: 0 to 100
Sensor Sensitivity: 0 to 100
Scan Length: 0 to 1000mm (0 to 39.4")
NOTE: Media Scan is also available in the Toolbox on the computer.
( See Media Scan in Using the Toolbox ).