Astro Machine AstroJet L1, Руководство оператора

Страница: 57 / 86

SECTION 4
MAINTENANCE
51
SECTION 4 – Maintenance
General, periodic maintenance is needed to keep Printer in good working order. This section covers how to care for
Ink Tanks, Printhead Cartridge, Service Station, and clear paper jams.
Replace Ink Tanks
Replace Ink Tanks when ink runs out.
1. Look at the Control Panel Touchscreen. Ink Tank Status information
appears left side of the Touchscreen. Note that some or all of Ink Tank
indicators may be low or empty.
CAUTION
VERIFY THAT THE LABELS ON THE INK CARTRIDGE AND
THE PRINTER'S INK STATION MATCH. BOTH SHOULD BE
"DN" OR BOTH SHOULD BE "DG".
2. Open Ink Tank Door ( hinged
at bottom ) . ( Disconnects
Printer communication with
Ink Tanks and allows safe
installation and replacement
.)
Open Ink Tank Latches [A]
and pull Ink Tank(s) [B] out of
Printer.
3. Remove new Ink Tank(s)
from packaging.
4. Slide new Ink Tanks ( labels
up ) into appropriate color slots
[B] . Close Ink Tank Latches.
INSTALLATION TIP:
Make sure Ink Tanks seat properly. Insert Ink Tank into appropriate
Ink Station, then pull Ink Tank back about an inch and push forward
firmly to insure that Ink Nozzles penetrate seals on Ink Tanks.
5. Close the Ink Tank Door. Ink colors fill in as Ink Tanks are installed. If
ink colors do not fill in after a few seconds, open the Ink Tank Door and
reinstall Ink Tank(s).
NOTE: If Ink Tank is installed, but Ink Tank indicator still does not
refresh, see “Clean Ink Tank Contacts” below.
6. When Printer stops processing and no errors appear on the System Status
screen, Printer is ready for use.
WARNING!
Ink in Ink Tanks may be harmful if swallowed. Keep new and used Ink Tanks
out of reach of children. Discard empty Ink Tanks immediately.