Astro Machine AstroJet L1, Руководство оператора

Страница: 68 / 86

SECTION 4
MAINTENANCE
62
Shipping or Transporting Printer
If you have to ship or transport Printer for any reason, the unit will have to be prepared.
Once the Printer is prepared, carefully package the Printer, Printhead Cartridge, Service Station
and Ink Tanks in the original packaging.
Remove Printhead Cartridge
1. Open Top Cover. From the Touchscreen, tap
“Service”
in the Menu drop-down, then tap “System
Deprime” . The Printer pumps any ink in system back
into Tanks. Then the Printhead Latch pops open. Then
Printhead Latch pops open.
CAUTION
DO NOT PRY OR MANUALLY LIFT
PRINTHEAD LATCH OR LATCH MAY
BREAK. ONLY OPEN LATCH USING
RELEASE PRINTHEAD BUTTON ON
THE TOUCHSCREEN OR IN THE
PRINTER TOOLBOX.
2. Make sure Printhead Latch is fully opened to retract
ink lines. Remove used Printhead Cartridge by tilting
it toward ink lines, then carefully lifting it out of the
Printhead Compartment.
3. Pack Printhead Cartridge area with absorbent towels to
catch any ink drips or spills. Carefully pack Cartridge
using original packaging.
Empty and Clean Ink Drip Tray
1. Open Clamshell.
2. Carefully lift the two tabs out of the
slots in the Print Engine Frame and
remove Ink Drip Tray Assembly
[A] . DO NOT tip the Tray or ink
may spill. Empty the Tray if
necessary and wipe off excess ink.
Clean using distilled water and a
damp, lint-free cloth.
3. Reinstall the Ink Drip Tray Assembly.