-13-
Some error codes may appear :
DEL :
Unit OK but :
Worn or encrusted electrode,
Insufficient salt content,
Water temperature less than 15°C.
DE1 :
Unit short-circuited.
DE2 :
Temperature of the unit too high; device switched to sleep mode for
one minute before automatic restart.
DE9 :
Voltage too weak.
INSTALLATION OF THE UNIT AND ELECTRICAL CONNECTIONS
A) Installation of the unit :
- Fix the unit to a wall of the plant room via the attachment holes in each
corner, using the screws and plugs supplied.
B) Electrical connections :
- The power supply to the unit : The system works in parallel with the filtration
pump. It is imperative that it functions at the same time as the filtration.
The connection is made via the contactors on the filtration pump in the
filtration unit.
A unit that is permanently connected will lose its warranty
- The power of the salt electrode: connect the cable supplied for this purpose.
The connection may be made in either direction. Tighten the screws
correctly. A badly tightened connection will result overheating.
C) Diagram of an electrical connection (example only) :
