ASI Tiger TG-1000, Инструкция по эксплуатации

Страница: 38 / 79

11
Function: Sets system configuration flags according to following table. It’s a Card-Addressed
command.
CCA Z= Description Display Comment
1 X axis movement direction is positive (default). [+] +
2 X axis movement direction is negative. [-] -
3 Y axis movement is positive (default)[+] (Note: In the MS-
4000, the default direction value for the Y axis is -1) +
4 Y axis movement is negative. [-] -
5 Z axis movement is positive (default)[+] +
6 Z axis movement is negative. [-] -
7 F axis movement is positive. [+] +
8 F axis movement is negative. [-] -
9 Disengage clutch [D] D
10 Engage clutch[E] E
11 Enable LCD display[O] O
12 Disable LCD display[F] F
13 CLOCKED DEVICES take shortest path S
14 CLOCKED DEVICES do not take shortest path L
20 The joystick and knob are always enabled, and the device
assignments cannot be changed. The JOYSTICK command
has no effect.
J
21 The joystick and knob can be disabled, and the device
assignments can be changed. The JOYSTICK command
works normally.
j Firmware default.
15 Disable ADEPT piezo self test on startup N Version 2.5 and
later
16 Enable ADEPT piezo self test on startup C Firmware default,
V2.5 and later
22 Reverses joystick polarity of the card's first axis r V3.05 and later