ASI Tiger TG-1000, Инструкция по эксплуатации

Страница: 32 / 79

11
Shortcut:
BU
Format:
[Addr#]BUILD [X]
Units: none
Type: Card-Addressed (defaults to COMM)
Function: This command returns the firmware “Build” version. BU X shows various configuration
options and build-modules that are present in the firmware. Adding the card address is
optional. If no address is given, then Tiger Comm replies. If an address is present, then
the specified card replies.
Example:
BU
TIGER_COMM
BU X
TIGER_COMM
Motor Axes: X Y P Q R S 0 1
Axis Types: x x u u u u w w
Axis Addr: 1 1 2 2 2 2 3 3
Hex Addr: 31 31 32 32 32 32 33 33
Axis Props: 0 0 0 0 0 0 0 0
As no address was given, Tiger Comm replies. It replies with its build name, all axis
names present in the system (axes will always be A-Z, filterwheels 0-9). For each axis the
type is given (see table in section “Identifying Controller Configuration”) and the card
address in both character and hex formats. Finally, an integer is given to indicate the
presence of special properties or capabilities of the axis, such as CRISP auto-focus or
RING BUFFER module for TTL positioning; these can be interpreted using the
information below. This command is useful to quickly identify all the axes names and
types present in the system.
1bu
STD_XY
1bu x