ASI Tiger TG-1000, Инструкция по эксплуатации

Страница: 35 / 79

11
CCA X= Description Display Comment
8 XY Leadscrew Ultra Fine (0.635 mm) U
15 XY GTS Motor/Fine Pitch (1.59 mm) a
16 XY GTS Motor/Coarse Pitch (6.35 mm) b
17 XY GTS Motor/Super Coarse (12.7 mm) c
18 XY Leadscrew Ultra Coarse (25.4 mm) D
28 XY SISKIYOU Motor/Leadscrew S
21 XY Linear Encoder 10 nm resolution 1 Firmware default
22 XY Linear Encoder 20 nm resolution 2
51 XY Linear Encoder 5nm resolution K
52 XY Linear Encoder 2.5nm resolution L
30 XY Limit Polarity – Normally Open o Firmware default
31 XY Limit Polarity – Normally Closed c
9 Z Scope Drive 100 μm/rev. (50 nm enc. resolution) N Firmware default
10 Z Scope Drive 200 μm/rev. (50 nm enc. resolution) Z
19 Z Scope Drive 100 μm/rev. (25 nm enc. resolution) H
11 Z Leadscrew Coarse Pitch B
12 Z Leadscrew Fine Pitch A
13 Z Leadscrew Super Coarse Pitch C
14 Z Leadscrew Ultra Fine Pitch U
29 Z SISKIYOU Motor/Leadscrew S
26 ZF Linear Encoder 10 nm resolution 1 Leadscrew devices
only.
LE
resol
ution
is
50nm
on
scope
drive
s.
27 ZF Linear Encoder 20 nm resolution 2
53 XY Linear Encoder 5nm resolution K
54 XY Linear Encoder 2.5nm resolution L
32 ZF Limit Polarity – Normally Open o Firmware default
33 ZF Limit Polarity – Normally Closed c
34 Piezo Range 50 μm Pf
41 Piezo Range 70 μm Pg
23 Piezo Range 100 μm P1