background image

 

Chassis Installation/Placement

 

Page 2-5

 

Installing GBIC Interfaces

 

If you have installed Gigabit Ethernet switch modules, you must install GBIC 
interfaces. Instructions for installing, removing, and maintaining GBIC 
interfaces are provided in this section.

 

 

Note:

 

  

 

GBICs are hot-swappable.

Installing a GBIC

To install a GBIC interface into a Gigabit Ethernet module:

1

Remove the GBIC from its protective packaging.

2

Grip the sides of the GBIC with your thumb and forefinger, 
then insert the GBIC into the slot on the face of the Gigabit 
Ethernet module.

3

Slide the GBIC into the slot until you hear or feel a click. 
The click indicates that the GBIC is locked into the slot.

4

When you are ready to attach the fiber-optic cable, remove 
the plugs from the GBIC and save them for future use.

Removing a GBIC

To remove a GBIC interface from a Gigabit Ethernet module:

1

Disconnect the fiber-optic cable from the GBIC SC-type 
connector.

2

Release the GBIC from the slot by simultaneously squeez-
ing the plastic tabs on both sides of the GBIC.

3

Slide the GBIC out of the slot.

4

Install the plugs in the GBIC optical bores, and place the 
GBIC in protective packaging.

Содержание IntraCore 6524























































































































































Отзывы: