Asante IntraCore 6524, Руководство пользователя

Страница: 20 / 150

Installation and Setup
Page 2-4
Equipment Rack Installation Procedure
To mount the IntraCore 6524 in an equipment rack:
1
Place the IntraCore 6524 on a flat, stable surface.
2
Locate a rack-mounting bracket (supplied) and place it over
the mounting holes on one side of the unit.
3
Insert six screws (supplied) into the holes and tighten with a
Phillips screwdriver. Do not use fewer than six screws for
this mounting.
4
For the other side of the unit, repeat the two previous steps.
5
Place the unit in the equipment rack.
6
Secure the unit by screwing its mounting brackets to the
equipment rack. Use a minimum of four screws for this
purpose.
▲
Important! Make sure the unit is supported until all
the mounting screws for each bracket are secured to the
equipment rack. Failure to do so could cause the unit to
fall, resulting in personal injury or damage to the unit,
or both.
Free-Standing/Desktop Placement
The IntraCore 6524 has four rubber feet on the bottom of the case that allow
for free-standing placement of the unit.
For free-standing/desktop placement:
1
Attach the four rubber pads (supplied) to the bottom of
each corner of the IntraCore 6524 case.
2
Place the unit on a flat surface with a minimum area of
17.1” x 13.5” (434.3 mm x 342.9 mm) and support capac-
ity of 22lbs(10kg).
3
Make sure there is enough ventilation space between the
IntraCore 6524 and surrounding objects.