Asante IntraCore 6524, Руководство пользователя

Страница: 78 / 150

Configuration
Page 3-50
Viewing Statistics
Viewing statistics on a regular basis allows you to evaluate your network’s
performance. You can view current statistics for the IntraCore 6524 on a per-
port basis and can change your view of those statistics and the counters
displayed in it.
To view statistics use the following procedure:
1
Type s in the Local Management Interface Main Menu. The
Port Statistics Counters screen is displayed, as shown in
Figure 3-25.
Figure 3-25 Port Statistics Counters since system up
2
Use the s command to select a port for which you want to
see the counters, or use n and p to find the port.
3
Type t to stop the periodic updating of the counters, so you
can record what they are at that time.
4
Type r to see a display of the same counters, but accrued
since the last reset of the counters, as shown in
Figure 3-26.
IntraCore 6524 Port Statistics Counters Module: 1 Port: 1
Elapsed Time Since Up: 002:06:47:34
<Counter Name><Total> <Avg./s> <Counter Name> <Total> <Avg./s>
Total RX Pkts 0 0 Total RX Bytes 0 0
Good Broadcast 0 0 Good Multicast 0 0
Total TX Pkts 0 0 Total TX Bytes 0 0
TX Unicast 0 0 TX Non-unicast 0 0
Dropped Pkts 0 0 Undersize Pkts 0 0
Oversize Pkts 0 0 CRCAlign Errors 0 0
Fragments 0 0 FCS Errors 0 0
Collisions 0 0 Late Events 0 0
64-Byte Pkts 0 0 65-127 Pkts 0 0
128-255 Pkts 0 0 256-511 Pkts 0 0
512-1023 Pkts 0 0 1024-1518 Pkts 0 0
<Cmd> <Description> <Cmd> <Description> <Cmd> <Description>
r since reset x next module n next port
t stop refresh v prev module p prev port
q quit m select module s select port
Command>