Configuration
Page 3-42
Figure 3-20 Baud Rate Menu
4
Select one of the options in the above screen to select the
required baud rate, and confirm it by typing y.
◆
Note: The baud rate default for console management is
9600 bps; in most cases the default will match the rate
for the connected terminal. If you change the baud rate
for the console port, the screen will display garbled data
unless the connected terminal is set to the same rate.
5
Type a to select the Destination Bank.
6
To download the image file, use any serial communications
software such as Procomm Plus, HyperTerminal, ZTerm,
etc. For file transfer instructions, follow the instruction
manual of the serial communications software.
◆
Note: The terminal on which the serial communications
software is running must have the same baud rate as the
IntraCore 6524 management module console. The con-
nection from the terminal to the switch console port
must be an RS232C straight-through cable.
7
Type d to download to the selected destination bank or b to
download and reset.
8
Type q to return to the previous menu after performing a
successful download.
Current Baud Rate: 9600 bps
Please select one from the following baud rate settings, or
press any other key to quit:
WARNING: The user must use the same baud rate setting of the terminal
after he/she confirms to change the baud rate setting of the
console in order to work correctly.
<Cmd> <Description>
a Set Baud Rate to 1200 bps
b Set Baud Rate to 2400 bps
c Set Baud Rate to 4800 bps
d Set Baud Rate to 9600 bps
e Set Baud Rate to 19200 bps
f Set Baud Rate to 38400 bps
g Set Baud Rate to 57600 bps
Choice>
Содержание IntraCore 6524
