Asante IntraCore 6524, Руководство пользователя

Страница: 56 / 150

Configuration
Page 3-28
3
To select the port for which you want to enable or disable
flow control, type s, n, or p.
4
To toggle flow control for the selected port, type f.
In the Advanced Port Configuration Menu, the Flow Control symbol for the
selected port reflects its change in state, as does the 802.3x Flow Control
setting.
▲
Important! When using this method of flow control,
the link partner must be configured to recognize PAUSE
frames.
Setting Port Class of Service
To set a port’s class of service, take the following steps.
1
Access the Port Configuration Menu by typing p in the
Configuration Menu.
2
In the Basic Port Configuration Menu, type a to open the
Advanced Port Configuration Menu.
3
To select the port for which you want to enable or disable
flow control, type s, n, or p.
4
To toggle flow control for the selected port, type c.
In the Advanced Port Configuration Menu, the Class of Service symbol for the
selected port reflects its change in state.
Setting Port Default Priority
This priority setting determines the order in which the port forwards packets.
Each port is associated with a traffic class: zero (0) is the lowest, and the default
priority level. Seven (7) is the highest priority level. Use the following procedure
to set the priority for a port:
1
Access the Port Configuration Menu by typing p in the
Configuration Menu.
2
In the Basic Port Configuration Menu, type a to open the
Advanced Port Configuration Menu.
3
Use s, n, or p to select the port for which you want to set
the default priority.