Asante IntraCore 6524, Руководство пользователя

Страница: 46 / 150

Configuration
Page 3-18
Enabling Authentication Traps
The IntraCore 6524 can be set to generate authentication traps. Authentication
traps are messages sent across the network to an SNMP network management
station. They alert you when someone attempts to read or change data without
the proper community string.
To set the IntraCore 6524 to generate traps, use the following procedure:
1
Open the SNMP Configuration Menu by typing n in the
Configuration Menu.
2
To toggle trap authentication to Enabled, type a.
To cancel the change, press ctrl-c at the command prompt.
3
Press Return. The new setting takes effect.
4
Type q to quit and return to the Configuration Menu.
Adding or Updating a Trap Receiver
Trap receivers are network management stations designated to receive traps
from the IntraCore 6524.
▲
Important! The maximum number of trap receivers that
can be set is four.
To add or update a trap receiver entry, use the following procedure:
1
Open the SNMP Configuration Menu by typing n in the
Configuration Menu.
2
Type a to Add a Trap Receiver. An IP prompt appears.
3
Type the new or updated IP address of the network manage-
ment station you want to receive traps, then press Return.
To cancel an entry, press ctrl-c at the command prompt.
4
Type the trap receiver’s community string at the prompt for
it, then press Return again.
The trap receiver entry is added or updated. Type q to
return to the Configuration Menu.