Asante IntraCore 6524, Руководство пользователя

Страница: 96 / 150

Advanced Management
Page 4-16
Configuring Security Level 2 or Level 3
To set security level 2 (port lock) or level 3 (intruder lock) on a port:
1
From the Configuration Menu, type t to access the Security
Management Menu.
2
Type p to access the Port Security Configuration Menu, as
shown in Figure 4-5.
3
Use the commands at the bottom of the menu to navigate
to the port you want to want to configure.
4
Select u to Set/Clear port security.
5
Type s to set security.
6
Type 2 to select Port Security with Port Lock, or 3 to select
Port Security with Intruder Lock.
7
Type 1 to have the system trust the first station that
addresses this port, or type 2 to enter a specific port-trusted
MAC address. If you type 2 , you are prompted to enter an
address where the values are hexadecimal and separated by
colons, as follows: xx:xx:xx:xx:xx:xx
Setting the Intruder Trap
If you set security level 2 or 3, you should also ensure the Intruder Trap is set.
Enabling this trap directs the system to send an alert to the designated trap
receiver when an intruder tries to access the port. To set the intruder trap:
1
From the Configuration Menu, type t to access the Security
Management Menu.
2
Type p to access the Port Security Configuration Menu, as
shown in Figure 4-5.
3
Type t to choose Toggle Port Security Trap.
4
Type 2 to toggle the new node trap (if it is not already
enabled).