manualshive.com logo in svg

Arturia MICROFREAK, Руководство пользователя

Поделиться
Скачать
Arturia MICROFREAK Скачать руководство пользователя страница 79

Many presets in the MicroFreak have sequence patterns embedded in them; some of those

patterns will be paraphonic and others will use only one voice. When in Paraphonic mode

all voices in the sequence will play back; with Paraphony "OFF" only the lowest note of a

step will be played.

Notes you play on the keyboard will always have a higher priority than the notes the

sequencer plays. If you hold down two keys on the keyboard while in Paraphonic 4-voice

mode, the sequencer will only have two voices available to play back a recorded sequence.

In that case, the sequence will play back the lowest two notes in the sequence.

Note:

There is only one pitch CV output at the rear of the MicroFreak. When you play back

a sequence pattern a step's lowest note will be transmitted. When playing the keyboard the

last note you play will be transmitted.

If you play chords on the MicroFreak, either with the keyboard or using the sequencer,

everything will be transmitted via MIDI including aftertouch and velocity. The four note

paraphonic limitation does not apply here: if you play a ten note chords all of that data will

be transmitted over MIDI. Notes arriving at the MIDI In port have have the same priority as

notes you play on the keyboard. If in paraphonic mode there are voices left the sequencer

will use them. It has the lowest priority.

13.1.1. Selecting and playing a sequence pattern

In a new preset the sequence will be empty. If you load a factory preset or a preset

you created before, sequences patterns A and B will sometimes contain sequencer data.

Pressing the A or B button will load the corresponding sequence pattern from RAM. Hitting

one of the A or B buttons will show “Sequence X Loaded” on the display.

You can play sequence pattern A and B alternatingly. When "play" is active, you can switch

from pattern A to B by pressing the A or B icon. The two pattern will always have the

same length inside one preset. You cannot play two sequences patterns simultaneously. The

sequence patterns you record become part of the preset you record them in.

If you want to undo the most recent recording of a sequence pattern, hold Shift and press

the icon of the sequence you want to reset to its previous state (A or B). The MicroFreak will

then load the most recently saved sequence pattern from memory and erase the existing

one. To erase a sequence pattern, hold the Sequencer A or B button and press Hold. Both

buttons will start blinking. When blinking stops, the sequence pattern is erased.

Note:

When performing, it is good to know that you can erase/reload pattern A while pattern

B is playing and vice versa.

Once you've recorded a sequence pattern there is no need to press play in order to hear

them; just press a key on the keybord and the currently active pattern will start playing.

A sequence can store both notes and modulation data. More about this later.

13.1.2. The Sequencer and the keyboard

The Sequencer and the keyboard can work together in exciting ways. When a sequence is

playing in Monophonic mode and you press a key on the keyboard, the sequence will pause

and resume as soon as it detects that you are no longer holding down keys. This allows for

some innovative playing techniques like a dialogue between you playing the keyboard and

the sequence that is playing. By playing keys and lifting your fingers rhythmically, you can

augment the playing sequence in interesting ways. In Paraphonic mode the sequence does

not pause; it will continue to play and accompany your keyboard playing.

Arturia - User Manual MicroFreak - The Sequencer

74

Содержание MICROFREAK









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды