Arturia MICROFREAK Скачать руководство пользователя

Страница: 38 / 104

To summarize:

• The Matrix is where you route sources to destinations. It's also the place where

you mix several sources together to control one common destination.

• The encoder is bipolar; you can set up positive or negative modulation and set

modulation strength.

5.3. Freaky ideas

It's mostly not good practice to modulate a destination at full force. The right amount of

modulation adds subtleness and expression to your patches. If you get this right, the Matrix

is a treasure trove of unusual finds. Some ideas below:

Change pitch scope:

Without making any connections on the Matrix the keyboard or a sequence will already

modulate the pitch of the oscillator with 1v per octave. If you take a sequence and add

that already existing modulation on the Matrix (route Key/Arp to Pitch), you can drastically

change the pitch scope of the sequence. Steps that were one semitone in the original

sequence will now be 2 or even four semitones. When you apply negative modulation, the

step distance will shrink to microtonal proportions.

Summing modulation signals:

Both envelopes: the Standard Envelope and the Cycling Envelope are sources for modulation

in the Matrix. You take advantage of that by mixing their output to control the same

destination. Why would you do that? By mixing the control voltages, you create a complex

envelope that can control the filter or arpeggio rate in unexpected ways.

Another summing idea:

When you sum two modulations to control one destination the result will usually be

unexpected and surprising, like when you mix the Cycling Envelope and the LFO that you

are using to modulate the Filter Cutoff frequency. You're using the Matrix as a modulation

mixer in this type of patch.

Modulating the Digital Oscillator:

This will probably become one of the most used techniques on the MicroFreak: modulate

Wave, Timbre and Shape of the Digital Oscillator with the (unsynced) LFO and Cycling

Envelope. By letting them control different aspects of the Digital Oscillator with different

speeds you can create ever-changing timbre patterns that never repeat.

Regular automatic transpositions:

For automatic transpositions of a sequence modulate Pitch with the Random wave of the

LFO, or with a slow-moving square wave if you need more regular automatic transpositions.

The square-wave technique will also work with a sequence.

Modulating Modulation:

As mentioned before you can modulate the amount of modulation of a connection point on

the Matrix with the Sequencer modulation tracks. You assign a matrix point by holding any

assign button, then move the matrix encoder. The moment you release the assign button,

the matrix point will be set as a destination. Again the LFO and Cycling Envelope are ideal

means to modulate these points.

Arturia - User Manual MicroFreak - Making Connections

Содержание MICROFREAK









































































































Результаты поиска

Содержание MICROFREAK

Отзывы:

Похожие инструкции для MICROFREAK

Бренды по названию

Популярные бренды

Arturia MICROFREAK, Руководство пользователя

Результаты поиска

Содержание MICROFREAK

Отзывы:

Похожие инструкции для MICROFREAK

Бренды по названию

Популярные бренды