Arthrex Angel, Руководство оператора

Страница: 74 / 108

Programmability Option
4-8
Angel ® cPRP System Operator’s Manual
Spin 1 RPM
The separation process consists of two spin cycles in the centrifuge. This protocol
parameter sets the speed (RPM) of the Centrifuge during the first centrifuge spin cycle.
Spin 1 Time
The Spin 1 Time parameter sets the time (minutes:seconds) of the first centrifuge
spin cycle.
Spin 2 RPM
The Spin 2 RPM protocol parameter sets the speed (RPM) of the centrifuge during the
second centrifuge spin cycle.
Spin 2 Time
The Spin 2 Time protocol parameter sets the time (minutes:seconds) of the second
centrifuge spin cycle.
Current Protocol
The name of the current protocol is displayed at the top right of the “ Protocols ” tab.
Any changes made to the protocol parameters will affect the current protocol after
3 seconds.
“Make this the default (wakeup) protocol” Button
Touching the “ Make this the default (wakeup) protocol ” Button
will set the current protocol as the wakeup protocol. Whenever
the Angel System is turned on, the wakeup protocol will be used by default.
“Modify RPM/Time” Button
Touching the “ Modify RPM/Time ” Button will allow the four RPM
and Spin Time parameters to be modified. Once touched, it will
become disabled and the “ Restore ” Button will become enabled.
“Restore” Button
Touching the “ Restore ” Button will restore the values of the four
RPM and Spin Time parameters to the recommended Standard
Protocol values. Once touched, it will become disabled, the four RPM and Spin Time
parameters will become disabled, and the “ Modify RPM/Time ” Button will
become enabled.
3. Protocol Pull-Down Button
The name of the currently loaded protocol is displayed to the left of the
Protocol Pull-Down Button. Touching the Protocol Pull-Down Button will
display a list of available protocols; touching the Protocol Pull-Down Button a second
time will collapse the list. Touch a protocol’s name in the list to select it as the current
protocol to Edit, Rename, or Copy.