Arthrex Angel, Руководство оператора

Страница: 46 / 108

Processing
3-8
Angel ® cPRP System Operator’s Manual
Figure 3-7 Keyboard Screen (Text Entry)
2. Using the Keyboard Screen, type the value into the field.
3. Once the value has been entered, touch the “
Enter ” Button, located in the lower
right corner of the Keyboard Screen.
The value of the field will be saved and it will return to the “
Tally ” tab or the
End of Case Screen.
Exit the Keyboard Screen without causing any changes to be saved by touching
the Close Button located in the upper right corner of the screen.
4. Repeat the previous steps for all three fields, if needed.
Modifying Optional Data Field Values
The following applies to a current case only. After entering values for the optional
data fields (as described in “ Entering Optional Case Data Fields ” on page 3-7),
they may be modified before beginning a new case. Once a new case has begun, the
values entered for the “ ID ”, “ Operator ”, and “ Notes ” fields cannot be modified.
To modify a previously entered value for a field on the current case, perform the
following steps:
1. Touch the button at the bottom of the screen that corresponds to the field to be
entered (for example, touch the “ ID ” Button to enter a value for the “ ID ” field). The
Keyboard Screen will be displayed on the Touch Screen Display (see Figure 3-7).
The original value of the field is shown at the top of the Keyboard Screen.
2. Modify or make corrections to the field. Use the “
Backspace
” Button (located at
the top of the Keyboard Screen), to delete the characters from the field. Or use the
“ Clear ” Button (located at the bottom of the Keyboard Screen), to delete all of the
characters at once.
3. Once the new value has been entered, touch the “
Enter
” Button, located in the
lower left corner of the Keyboard Screen.
The value of the field will be saved and it will return to the “
Tally ” tab or End of
Case Screen.