Using the Streamline Data View
ARM DUI 0482K
Copyright © 2010-2012 ARM. All rights reserved.
3-5
ID120712
Non-Confidential
3.1.3
Streamline Capture Data and Streamline Analysis Reports
If you have successfully captured data on your target, the Streamline Data view contains two
resource types. Streamline Capture Data contains all of the raw data collected on the target
during a capture session. Streamline Analysis Reports are created on the host from the
information contained in the Streamline Capture Data.
The list of Streamline Capture Data directories tell you when the capture was created, where it
exists on your file system, and which version of gator was used to create it.
Note
Streamline Analysis Reports files are not compatible across different versions of Streamline, but
the same is not true of Streamline Capture Data. If an upgrade to Streamline renders a Streamline
Analysis Report incompatible, double-click on the Streamline Capture Data resource to
re-analyze it and create a new, compatible Streamline Analysis Report. It is recommended that
you re-create Streamline Capture Data if it you created it using a version of gator many
generations old.
3.1.4
Stopping a capture session manually
You can use the Capture Options dialog box to set a specific capture session length, but if you
want to control the length of the session yourself, you can use the Streamline data view to
terminate it manually. To do so, click the
Stop
button that appears on the left in the new capture
entry.
Figure 3-5 A working Streamline Capture
A number in the middle of the Capture working graphic tells you the current duration of the
Capture.
3.1.5
See also
Tasks
•
Opening the Counter Configuration dialog box
Reference
•
•
