Arjohuntleigh CALYPSO, Инструкция по эксплуатации

Страница: 12 / 44

12
Back rest (1)
• The hand rest/back rest can be pushed backwards.
• Only CDB60XX model. The back rest can be used on
either side depending on which side the resident will be
transferred from. It is detached by pushing at the rim
straight out. Put it on the actual side and snap it in place.
Seat (2)
Only CDB60XX model.
• The seat insert can be taken out by grabbing it the middle
and pulling it straight up.
a The seat is in two parts. The front is pulled out by grab-
bing the frame underneath and at the same time pressing
upwards with the wrists until it comes loose.
b The back is pulled out by grabbing the frame on top and
pressing upwards with the wrists until it comes loose.
The seat cushion (3)
• The seat cushion is only to be used together with the seat
insert. First attach one of the strips to the front of the
seat. Stretch the seat cushion and attach the other strip to
the back of the seat.
Castor brakes (4)
• The brakes on the castors will be activated by pressing
the castor lock tab (
A
) with your foot.
• The brakes are released from the castors by pressing
down the centre tab (
B
).
WARNING
The centre seat insert must be used
together with the seat cushion. Failure to
follow these instructions may result in
injury of the resident.
NOTE
Only CDB 70XX.
The body supported material in the seat and back
rest is PUR (polyurethane)