background image

 3

Introduction

It is recommended that all sections of this User Guide be read prior to product use. 

Carefully review the 

Contraindications

Safety Information

 and 

Risks and Precautions

 

sections prior to placing a patient on any AtmosAir

 with SAT

 Mattress Replacement 

System (MRS).
Caregivers should review this information with the patient and the patient's family and / or 

legal guardian. Save this User Guide in an easily accessible location for quick reference.

This User Guide is comprised of the following 

AtmosAir 

MRS models / series:

•  AtmosAir 

with

 SAT 

4000 Series (non powered, indicates pump not available)

•  AtmosAir 

with

 SAT 

9000 Series (non powered)

•  AtmosAir 

with

 SAT 

9000A Series (powered with alternating pressure)

•  AtmosAir 

with

 SAT 

9000AR Series (powered with alternating pressure and rotation)

•  AtmosAir 

with

 SAT APod 25

 Series (non powered)

•  AtmosAir 

with

 SAT APod 25 

A Series (powered with alternating pressure)

•  AtmosAir 

with

 SAT APod 25

 AR Series (powered with alternating pressure and rotation)

•  AtmosAir 

with

 SAT 

T-Series (non powered)

•  AtmosAir 

with

 SAT 

T-Series A (powered with alternating pressure)

•  AtmosAir 

with

 SAT 

T-Series AR (powered with alternating pressure and rotation)

•  AtmosAir 

with

 SAT 

V-Series (non powered)

•  AtmosAir 

with

 SAT 

M-Series (non powered)

The 

AtmosAir

 MRS comes in a wide variety of lengths and widths to support various 

customer requirements. Contact an Arjo representative for additional product information.

Indications

•  AtmosAir

 MRS are intended to treat and prevent pressure ulcers.

Contraindications

•  Unstable vertebral fracture

•  Cervical and skeletal traction

Risks and Precautions

Transfer –

 Standard precautions should be taken during patient transfer.

Rotation (AR models) –

 Prior to engaging rotation ensure that bed frame has side rails 

and that all side rails are fully engaged in full upright and locked position. 
If using 

Alternating Pressure

 with addition of the pump 

(A models)

 then a local risk 

assessment should be undertaken to review if use of side rails is required.
Ensure pump hoses are properly connected to appropriate side of mattress for the desired 

function (see 

Pump Installation

). 

WARNING:

 Incorrect connection of pump hoses can increase risk of potential patient falls.

Side Rails and Restraints – WARNING:

 Use or non-use of restraints, including side rails, 

can be critical to patient safety. Serious or fatal injury can result from the use (potential 

entrapment) or non-use (potential patient falls) of side rails or other restraints. 

See related 

Safety Information.

Содержание AtmosAir SAT 4000 Series









































Отзывы: