Arjo AtmosAir SAT 4000 Series, Инструкция по эксплуатации

Страница: 18 / 40

14
Care and Cleaning
The following processes is recommended, but should be adapted to comply with local
institution protocols. If you are uncertain, you should seek advice from your local Infection
Control Specialist.
The
AtmosAir MRS should be routinely decontaminated between patients and at regular
intervals while in use.
If a powered AtmosAir MRS, ensure power cord is unplugged from
wall outlet before performing care and cleaning.
Do not use Phenol-based solutions or abrasive compounds or pads on
the cover during decontamination process as these will damage the
surface coating. Do not boil or autoclave the cover. Avoid immersing
electrical parts in water during the cleaning process. Do not spray
cleaning solution directly onto the pump.
Covers should be wiped down immediately after it has been exposed
to fluids or spills.
Fire Barrier
Care should be taken with regards to the fire barrier when the cover is removed. It is
recommended that Personal Protective Equipment (PPE) is used during handling of the
mattress with the fire barrier exposed to avoid contact with loose particles. To ensure
optimal product performance, avoid over-handling of the fire barrier and handle with care.
Fire barrier should be replaced if soiled or damaged.
Cover Cleaning Options
Sewn AtmosAir MRS (Top cover can not be removed from base)
1. If a powered MRS, unplug pump before cleaning.
2. Remove or push bed linens to center of mattress.
The sewn AtmosAir MRS cover is cleaned by wipe down methods only.
Do not launder as damage to the base may occur.
3. Wipe and rinse any soiling from the mattress surface and base. Use 1000 ppm
chlorine or 70% alcohol.
4. Rinse with a wet towel to remove chemicals.
5. After wipe down, dry surface with towel.
6. Ensure bed linens are refitted and not wrinkled under patient.
7. Clean pump and tubes (if needed) by wiping with a damp cloth.
RF Welded AtmosAir MRS (Detachable top cover)
1. If a powered MRS, unplug pump before cleaning.
2. Push bed linens to center of mattress to wipe down, remove to launder top cover
or wipe down as described below.
The RF Welded AtmosAir MRS has a detachable top cover that can be
laundered. However the base is cleaned by wipe down methods only.
Do not launder base or fire barrier as damage may occur.