Arjo AtmosAir SAT 4000 Series, Инструкция по эксплуатации

Страница: 12 / 40

8
AtmosAir
with
SAT
V-Series*
V-Series mattress on VersaCare™ Frame
1. Position mattress on bed frame
with logo facing up and product
information tags at foot end of
bed.
2. Slide locking bar located in
pocket on underside of headend
of mattress to one side, as shown
at right (Figure 1).
* V-Series is compatible for use with the Hill-Rom
VersaCare™ frame.
3. Slip end of locking bar into slot on head-end of bed frame, as shown below
(Figures 2 and 3).
4. Slip other end of locking bar into other slot on head-end of bed frame, as shown
below (Figure 4).
5.
Figure 3
Figure 2
Locking Bar Bed Frame
Locking Bar Slot
Slot
Repeat steps 2 through 4 to secure foot-end of mattress.
Foot-end locking bar may
need to be flexed slightly to
slip into foot-end slots.
Magnets are integrated
on the AtmosAir V-Series
bottom cover to help keep
the mattress in place during
foot section extension /
retraction.
Bed Frame
HEAD OF BED
Underside of Mattress
Locking Bar
Pocket
Figure 1
Figure 4
Locking Bar
Slot