Arista AP-3500 Скачать руководство пользователя страница 33

Страница: 33 / 48



USB Device Setting

Scroll to this item and press <Enter> to view the following screen:

USB 1.0 Controller (Enabled)

Enables or disables the onboard USB 1.0 controller. We recommend users keep the dafault value.

Disabling it might cause the USB devices not to work properly.

USB 2.0 Controller (Enabled)

Enables or disables the onboard USB 2.0 controller. We recommend users keep the dafault value.

Disabling it might cause the USB devices not to work properly.

USB Operation Mode (High Speed)

Auto decide USB device operation mode.

[High Speed]: If USB device was high speed device,then it operated on high speed mode. If USB

device was full/low speed,then it operated on full/low speed mode.

[Full/Low Speed]: All of USB device operated on full/low speed mode.

The Choices: High Speed (default), Full/Low Speed.

USB Keyboard Function (Enabled)

Enable this item if you plan to use a keyboard connected through the USB port in a legacy operating

system (such as DOS) that does not support Plug and Play.

USB Mouse Function (Enabled)

Enable this item if you plan to use a mouse connected through the USB port in a legacy operating

system (such as DOS) that does not support Plug and Play.

Phoenix-AwardBIOS CMOS Setup Utility

USB Device Setting



Menu Level

USB 1.0 Controller

[Enabled]

USB 2.0 Controller

[Enabled]

USB Operation Mode

[High Speed]

USB Keyboard Function [Enabled]

USB Mouse Function

[Enabled]

USB Storage Function

[Enabled]

*** USB Mass Storage Device Boot Setting ***

Item Help





: Move Enter: Select

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

+/-/PU/PD: Value

[Enable] or [Disable]

Universal Host

Controller Interface

for Universal Serial

Bus.

USB Storage Function (Enabled)

This item allows you to enable or disable the USB Storage Legacy Support.

Press <Esc> to return to the Integrated Peripherals page.

Содержание AP-3500

















































Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды

Arista AP-3500, Руководство пользователя

Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды