Arista AP-3500 Скачать руководство пользователя страница 23

Страница: 23 / 48



Hard Disk Boot Priority (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

Virus Warning (Disabled)

This option flashes on the screen. During and after the system boot up, any attempt to write to the

boot sector or partition table of the hard disk drive will halt the system with the following message.

You can run an anti-virus program to locate the problem. The default setting is "Disabled".

CPU L1 & L2 Cache (Enabled)

These two options speed up memory access. However, it depends on the CPU/chipset design.

The default setting is "Enabled". CPUs with no built-in internal cache will not provide the "CPU

Internal Cache" item on the menu.

CPU L3 Cache (Enabled)

This item is only available when processors support L3. Some high-end processors support L3. If

the CPU do support L3, you may set this item to enable or disable. Leave this item at the default

value for better performance.

Phoenix-AwardBIOS CMOS Setup Utility

Hard Disk Boot Priority



Menu Level

1. Bootable Add-in Cards

Item Help





: Move Enter: Select

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

+/-/PU/PD: Value

Use < > or < > to select

a device, then

press <+> to move it

down the list. Press

<ESC> to exit this

menu.





Press <Esc> to return to the Advanced BIOS Features page.

Hyper-Threading Technology (Enabled)

This item is only available when the chipset supports Hyper-Threading and you are using a Hyper-

Threading CPU.

Quick Power on Self Test (Enabled)

Enable this item to shorten the power on self testing (POST) and have your system start up faster.

You might like to enable this item after you are confident that your system hardware is operating

smoothly.

Содержание AP-3500

















































Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды

Arista AP-3500, Руководство пользователя

Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды