Arista AP-3500 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 48

background image

17

IDE HDD Auto-Detection

Press <Enter> while this item is highlighted to prompt the Setup Utility to autumatically detect and

configure an IDE device on the IDE channel.

Serial ATA Channel 1/2 (Auto)

Leave this item at Auto to enable the system to automatically detect and configure SATA devices

on the channel. If it fails to find a device, change the value to Manual and then manually configure

the drive by entering the characteristics of the drive in the items described below.

Refer to your drive's documentation or look on the drive casing if you need to obtain this information.

If no device is installed, change the value to None.

Before attempting to configure a hard disk drive, ensure that you have the configuration

information supplied by the manufacturer of your hard drive. Incorrect settings can result

in your system not recognizing the installed hard disk.

Access Mode (Auto)

This item defines ways that can be used to access SATA hard disks. Leave this value at Auto and

the system will automatically decide the fastest way to access the hard disk drive.

Video (EGA/VGA)

This item defines the video mode of the system. This motherboard has a built-in VGA graphics

system; you must leave this item at the default value.

Halt On (All Errors)

Press <Esc> to return to the Standard CMOS Features page.

Press <Esc> to return to the main menu setting page.

«
...
18
19
20
21
22
...
»

Содержание AP-3500

















































Отзывы:

Нет отзывов

Похожие инструкции для AP-3500

Бренд: IBM Страницы: 314

ARK-3531 Series

Бренд: Advantech Страницы: 84

CQ2000 - Desktop PC

Бренд: Compaq Страницы: 12

Бренд: Compaq Страницы: 20

Бренд: Avid Technology Страницы: 23

Бренд: AZZA Страницы: 12

Essentio CG5275

Бренд: Craftsman Страницы: 26

Бренд: Craftsman Страницы: 8

Бренд: NEC Страницы: 110

Бренд: NEC Страницы: 2

PowerMate VT 300i Series

Бренд: NEC Страницы: 190

PowerMate Ready ES Pro

Бренд: NEC Страницы: 109

Ready 9734ES Pro

Бренд: NEC Страницы: 76

POWERMATE VT 300 RELEASE NOTES

Бренд: NEC Страницы: 192

Бренд: NEC Страницы: 253

PowerMate V100e

Бренд: NEC Страницы: 155

POWERMATE PROFESSIONAL PII

Бренд: NEC Страницы: 236

Бренд: Seametrics Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды