Arista AP-3500 Скачать руководство пользователя страница 31

Страница: 31 / 48



Super IO Device (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

POWER ON Function (BUTTON ONLY)

This feature allows you to set the method by which your system can be turned on.

Watch Dog Timer Select (Disabled)

The watchdog timer makes the system auto-reset while it stops to work for a period. The integrated

watchdog timer can be setup as system reset mode by program.

This setting is used to Enable or Disable the Watch Dog Timer function. It must be used in

conjunction with the Watch Dog jumper. To enable, choose from 1, 2, 3, 4, 8, 15 or 30 min.

KB Power ON Password (Enter):

Set the password when Power On by Keyboard is

set to Password. Press <Enter> on this item and set a password with up to 5 characters

and then press <Enter> to accept. To turn on the system, enter the password and

press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the

password, press <Enter> again without entering the password to clear the password

settings.

Hot Key Power ON (Ctrl-F1):

When the POWER ON Function is set to Hot KEY,

use this item to set the hot key combination that turns on the system.

Onboard Serial Port 1 (3F8/IRQ4)

This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port

1 (COM1).

Onboard Parallel Port (378/IRQ7)

This option is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel port.

•

Phoenix-AwardBIOS CMOS Setup Utility

Super IO Device



Menu Level

POWER ON Function

[BUTTON ONLY]

KB Power ON Passward Enter

Hot Key Power ON

Ctrl-F1

Onboard Serial Port 1

[3F8/IRQ4]

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

EPP Mode Select

EPP1.7

ECP Mode Use DMA

Item Help





: Move Enter: Select

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

+/-/PU/PD: Value

Содержание AP-3500

















































Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды

Arista AP-3500, Руководство пользователя

Результаты поиска

Содержание AP-3500

Отзывы:

Похожие инструкции для AP-3500

Бренды по названию

Популярные бренды