ARIS TENSOR, Оригинальное учредительное заявление с ручным управлением

Страница: 30 / 32

ARIS Stellantriebe GmbH Rotter Viehtrift 9 T49(0)2241-25186-0
www.stellantriebe.de D-53842 Troisdorf T49(0)2241-25186-99
Declaration of Incorporation of partly completed
machinery
according
EU directive 2006/42/EC Annex II B „Machinery Directive“
__________________________________________________________________
Herewith we declare, that the below mentioned incomplete machinery
Product description: Electrical actuator
Product Types
:
tensor and identical
Fulfills the basic requirements of the annex I of the directice 2006/42/EC, if it applies to the appropriate
order:
1.1.2c,e; 1.1.3; 1.1.5; 1.3.4; 1.5.1; 1.5.2; 1.5.4; 1.5.5; 1.5.6; 1.5.8; 1.5.9; 1.5.11; 1.6.1; 1.6.4; 1.7.3;
1.7.4
The following harmonized standards were applied:
DIN EN ISO 12100:2011-03 („Safety of machinery“)
The product is a partly completed machinery accordance with Article 2 letter g of the Directive
2006/42/EG. The special technical documents according to annex VII part B have been created. For
reasonable requests these documents can be sent electronically to the responsible authorities.
Regarding the outgoing electrical hazards of the partly completed machinery, the safety objectives of
directive 2006/95/EC ("Low Voltage Directive") are complied with in accordance with Annex I No. 1.5.1
of Directive 2006/42/EC. Applied harmonized standard:
DIN EN 61010-1:2011-07 (“Safety requirements for electrical equipment for
measurement, control, Control and laboratory use ")
The initial operation of this incomplete machinery is only permitted, if it is approved that the facility or
machinery in which it will be installed corresponds to the EC directive 2006/42/EC, if it applies.
Authorized representative for collection of relevant technical documents:
Claudio Usai
Quality and product safety
ARIS Stellantriebe GmbH
Rotter Viehtrift 9
D-53842 Troisdorf
This declaration is invalid if the machinery is changed or rebuilt in a manner it was not designed for.
Troisdorf, 02. March 2015
___________________________________
C. Usai (Quality and product safety)