ARIS TENSOR, Оригинальное учредительное заявление с ручным управлением

Страница: 19 / 32

19 Tensor
57/56 Message output, potential free opener, max. 200 V
or 0.5 A und max. 10 W
55 Actual value output, +
54 Actual value, ground
53 + 5 V supply
52 Set value input
51 Set value input, ground
All drives are preset at the factory. When you change the DIP switch, the instructions given
here are to be observed!
The function of the inputs and outputs at pin 51 to 55 (1) is set by DIP switches (2), see
section 6.2. The message output (3) is used for operational monitoring.
Message output
The message output (1) Pin 56/57 works as potential free
activated opener. The capacity of the contact is
max. 200 V supply
max. 0.5 A
max 10 W
0(4)–20 mA (DC)
optional 0–10 V (DC)
L
N 51 52 54 55
–
+ – +
85–265 V (AC)
24 V (AC)
0–20 mA (DC)
I-ACT
M
2 53 57 56
Fault message
output
(potential free)
3
ADVICE
!