Ariens Pro 28 EFI CE, Руководство по обслуживанию, Страница: 65 / 84

EN – 64
AXLE BEARING REPLACEMENT
(TRACK MODELS)
Remove Left Bearing
IMPORTANT:
Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See
Service Position
on
page 7.
4. Remove track drive wheel and remove track. See
Remove Track Drive Wheel
on page 60 and
Remove
Track
on page 61.
5. Remove bottom cover. See
Remove Bottom Cover
on
page 14.
See Figure 153 and Figure 154.
6.
Remove E-ring from right axle end.
7.
Models 926060, 926069, 926338:
Remove hubs from
axle ends.
Model 926337:
Remove flat steel washers from axle
ends.
8. Remove long axle from differential gear.
See Figure 155 and Figure 156.
9.
Loosen, but DO NOT remove hardware retaining axle
mount plates to side plates.
10. Remove sleeve bushing between frame and carriage
side plate bearings.
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Draining Fuel System
on page 7.
Make sure unit is secure and will not tip.
Figure 153
Models 926060, 926069, 926338
Figure 154
Model 926337
Figure 155
1. Axle Mount Plate
2. Sleeve Bushing
3. Bearing
1
2
3
Model 926337