EN – 25
15. Remove hairpin securing transaxle bypass rod to
transaxle and remove bypass rod from transaxle. See
Figure 46.
16. Remove bypass rod through unit rear.
17. Remove hardware securing transaxle to transaxle
mount. See Figure 47.
See Figure 48.
18. Tilt transaxle so tension is removed from chain and
remove chain from transaxle.
19. Remove transaxle.
20. Remove E-ring, pinion sprocket, spacer bushing and
key from transaxle driveshaft. See Figure 49.
Figure 46
Figure 47
Figure 48
Figure 49
1. E-Ring
2. Pinion Sprocket
3. Spacer Bushing
4. Key