Ariens Pro 28 EFI CE, Руководство по обслуживанию, Страница: 64 / 84

EN – 63
4. Model 926337: Adjust track tension. Refer to
Operator’s Manual for adjustment procedure.
5. Fill fuel tank and reconnect spark plug wire.
IMPORTANT:
Check all adjustments after first use.
BOGIE WHEEL REPLACEMENT
Remove Bogie Wheel
IMPORTANT:
Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See
Service Position
on
page 7.
4. Remove track drive wheels and remove tracks. See
Remove Track Drive Wheel
on page 60 and
Remove
Track
on page 61.
5. Remove hardware retaining bogie wheels to rear track
axle and remove wheels. See Figure 152.
Install Bogie Wheel
1. Install bogie wheel onto track axle and secure with hex
nut, but DO NOT overtighten.
NOTICE:
Bogie wheel should spin freely.
2. Reinstall track drive wheel and reinstall track. See
Install Track Drive Wheel
on page 60 and
Install Track
on page 61.
3. Return unit to operating position.
4. Model 926337: Adjust track tension. Refer to
Operator’s Manual for adjustment procedure.
5. Fill fuel tank and reconnect spark plug wire.
IMPORTANT:
Check all adjustments after first use.
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Draining Fuel System
on page 7.
Make sure unit is secure and will not tip.
Figure 152