EN – 51
HEADLIGHT REPLACEMENT
Remove Bulb
IMPORTANT:
Save all hardware for reinstallation.
1.
Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2.
Disconnect spark plug wire from engine.
3.
Remove hardware securing headlight to dash panel.
See Figure 114.
Remove headlight from dash panel.
5.
Disconnect wire harness from bulb.
6.
Turn bulb one-eighth turn counterclockwise and
remove from headlight bezel. See Figure 116.
Install Bulb
IMPORTANT:
DO NOT touch new bulb with bare hands;
wear gloves. Body oil on a headlight bulb can increase bulb
temperature and reduce bulb life.
1.
Install bulb into headlight bezel and turn
one-eighth turn clockwise.
2.
Connect bulb to wire harness.
3.
Reinstall headlight housing into dash panel and
secure with two tapping screws.
IMPORTANT:
Reconnect spark plug wire.
Figure 114
Figure 115
Figure 116