Areca ARC-5030 Series, Руководство пользователя

Страница: 82 / 187

LCD CONFIGURATION MENU
82
Areca drive Truncation mode Multiples Of 10G uses the same
capacity for both of these drives so that one could replace the
other.
Multiples Of 1G: If you have 123 GB drives from different ven-
dors; chances are that the capacity varies slightly. For example,
one drive might be 123.5 GB, and the other 123.4 GB. Areca
drive Truncation mode Multiples Of 1G uses the same capacity
for both of these drives so that one could replace the other.
No Truncation: It does not truncate the capacity.
4.8.5.11 Terminal Port Configuration
Parity value is fixed at None.
Handshaking value is fixed at None.
Speed setting values are 1200, 2400, 4800, 9600,
19200,38400, 57600, and 115200.
Stop Bits values are 1 bit and 2 bits.
To set or change the RAID subsystem COMA configuration, press
the UP/DOWN to select COMA Configuration and then press the
ENT to accept the selection. The baud rate setting or number of
stop bit screen appears and uses the UP/DOWN select the set-
ting function. The respect selection screen appears and uses the
UP/DOWN arrow to set the value. After completing the modifi -
cation, the confirmation screen will be displayed and then press
Enter to accept the function.
4.8.5.12 Restart Controller
Use the Restart Controller function to restart the RAID subsys-
tem controller. To restart the RAID subsystem, press the UP/
DOWN to select Restart Controller and then press the Enter to
accept the selection. The confirmation screen will be displayed
and then press Enter to accept the function.
Note:
It only can work properly at Host and Drive without any activ-
ity.