Areca ARC-5030 Series, Руководство пользователя

Страница: 79 / 187

LCD CONFIGURATION MENU
79
to turn the beeper off temporarily. The beeper will still activate
on the next event.
4.8.5.3 Change Password
To set or change the RAID subsystem password, press the UP/
DOWN to select Change Password and then press the Enter to
accept the selection. The New Password: screen appears and
enter new password that user want to change. Using the UP/
DOWN to set the password value. After completing the modifi -
cation, the confirmation screen will be displayed and then press
Enter to accept the function. To disable the password, presses
Enter only in the New Password: column. The existing password
will be cleared. No password checking will occur when entering
the main menu from the starting screen.
4.8.5.4 JBOD/RAID Configuration
For ARC-5030
JBOD is an acronym for “Just a Bunch Of Disk”. It represents a
volume set that is created by the concatenation of partitions on
the disks. For the ARC-5030, it can only see the first two disks,
when you select the JBOD option. User needs to delete the
RAID set, when you want to change the option from the RAID to
the JBOD function.
For ARC-6020
JBOD is an acronym for “Just a Bunch Of Disk”. It represents a
volume set that is created by the concatenation of partitions on
the disks. For the ARC-6020, it can see the five individual disks,
when you select the JBOD option. User needs to delete the
RAID set, when you want to change the option from the RAID to
the JBOD function.
4.8.5.5 RAID Rebuild Priority
The “Raid Rebuild Priority” is a relative indication of how much
time the controller devotes to a rebuild operation. The RAID
subsystem allows user to choose the rebuild priority (low, nor-
mal, high) to balance volume set access and rebuild tasks ap-
propriately.