Areca ARC-5030 Series, Руководство пользователя

Страница: 133 / 187

VT-100 UTILITY CONFIGURATION
133
5.5.6 U320 SCSI Target Configuration (ARC-6020
only)
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
U320 SCSI Target Config
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
U320 SCSI Target Config
U320 SCSI Target Config
Mute The Alert Beeper
Ch0 QAS
Ch0 QAS
1200
Disable
Enable
Arbitration allows one SCSI device to gain control of the SCSI bus
to allow that SCSI device to initiate or resume a task. There are
two methods that a SCSI device may use to arbitrate for the SCSI
bus: normal arbitration and QAS. Normal arbitration is mandatory
and requires the detection of a BUS FREE phase on the SCSI bus
before starting. QAS is optional and, when enabled, requires the
initiation and detection of a QAS REQUEST message before start-
ing. Press Enter to enter the Main menu. Press UP/DOWN key
to select the U320 SCSI Target option, and then press Enter .
5.5.7 Ethernet Configuration
Use this feature to set the controller Ethernet port configuration.
Customer doesn’t need to create a reserved space on the arrays
before the Ethernet port and HTTP service working.
5.5.7.1 DHCP Function
DHCP (Dynamic Host Configuration Protocol) is a protocol that
lets network administrators manage centrally and automate the
assignment of IP (Internet Protocol) configurations on a com -
puter network. When using the Internet’s set of protocols (TCP/
IP), in order for a computer system to communicate to another
computer system it needs a unique IP address. Without DHCP,