134
TA064
6. Install the park pawl with dowel and spring.
TA074
TA065A
7. Install the shift drum gear onto the shift drum aligning
the appropriate splines of the drum with the gear.
8. Install the shift shaft gear onto the shift shaft with the
timing marks facing up; then install into the case with
the gear aligning with the shift drum gear.
TA066A
NOTE: Rotate the shift drum and the shift shaft to
ensure the timing marks are correctly aligned.
9. Install the star detent over the shift drum aligning the
appropriate splines of the detent with the shaft splines
and the dot facing up.
TA134A
10. Install an appropriate bearing seal protector tool onto
the bearing of the output shaft.
TA067
11. Apply a coat of Loctite #5699 to the case; then ensur-
ing the shift shaft (O-ring lightly coated with grease)
and shift rail are correctly seated, install the cover.
TA068
NOTE: It will be necessary to tap the cover onto the
case using a rubber mallet. Ensure the alignment
pins are properly oriented.
12. Secure the cover with the cap screws and tighten to 20
ft-lb.
13. Install the detent (gold plug) with spring and O-ring.
Tighten to 20 ft-lb.
