Arcomed Volumed nVP7000 Chroma, Руководство по обслуживанию, Страница: 16 / 49

SH-7000-Chroma-EN-04/17 16
Code Meaning Cause Measure
F-06
Motor too fast
(Volume counter
check)
SW Problem SW update necessary
Main PCB defect Replace Main PCB
F-07
Key stuck
Display PCB defect
Problem
Replace Display PCB
If any key is pressed
more than 1min. The
Microprocessor
detected the key as
defect and will give a
“Defect”-Alarm.
Open pump and unplug battery
cables.
Display PCB is not
mounted properly
Mount Display PCB properly
Multiple key in
signal Display PCB, ribbon
cable Replace Display PCB or ribbon
cable
F-09 CRC
– Error
SW not loaded
correctly
Make SW update
F-10 Transmit check
Internal transmission
check
If persistent, check cable main
PCB and display PCB, replace if
necessary
F-11 CRC
– Error
Initial CRC check,
transmission check
If at start up: Init Setup, SW
update, restart, if during operation
and persistent: check cable main
PCB and display PCB, replace if
necessary
F-12,
13
Timing check Internal timing failed
If persistent, replace main or
display PCB
F-18 Clutch check (6000)
Safety check clutch,
DC driver defect 6000 only: If persistent: Replace
main PCB
F-20 CRC
– Error
SW problem:
Configuration
Reload Configuration
F-21
Revision Check
Error
SW Release and
Configuration do not
match
Reload SW and Corresponding
Configuration
F-22 CRC-Error SW problem: pump text Reload Pump Text
F-23
Revision Check
Error SW Release, text do
not match
Reload SW and pump text.
F-24 CRC Error
SW problem: Drug
mode Reload SW and corresponding
drug mode.
F-25
Revision Check
Error SW Release, Drug
mode do not match Reload SW and corresponding
drug mode.
F-30 PCA Button Check
PCA Button or too
many patient presses
Replace PCA button or instruct
patient not to make too many
presses