55
CNC System Instruction
9. Diagnose
In the system main menu, press [F5] to enter DIAGNIZE main window, as shown in the figure below:
In Plasma Operation
In Flame Operation
9.1
Check Input/output Ports
The system diagnosis will show the hardware resources available. In DIAGNOSE window, it is allowed to check the state of
input/output port.
9.2 Output Check
Move cursor to any position of the 8 optical isolation output ports and change the level state of output with "0"and "1". 1
stands for enable while 0 stands for disable. Refer to "Definitions of Input/output Port" for the definitions of output ports.
9.3 Input Check
Let the system to show the state of active optical isolation input ports. 0 stands for low potential( grounding) while 1 stands for
high potential(24V or overhead). See "Definitions of Input/output Ports" for the symbol definitions of input ports.
