16
[PLASMA ] interface set:
a. Press [
F4
] to enter [
PLASMA
] interface, Set each parameter according to pho-
to shows below(2 pages):
DO NOT change it randomly.
b. Then press [
F7
] to save this set.
Note:
1
-
Row 8th and Row 9th can be adjusted according to different thickness of plate.
2
-
Row 8th
for the necessary time of piercing process;
3
-
Row 9th
for the necessary time of first piercing process. The torch is cold at the begin-
ning, so we set it a little bit longer than Row 8th.
