53
CNC System Instruction
X
-
axis width of steel plate
----
The actual width of steel plate along X axis, which is enabled only in running extra large program.
Y
-
axis height of steel plate
----
The actual height of steel plate along Y axis, which is enabled only in running extra large program.
Common edge option——
Since the system may control three kinematic axes, this option is used to determine the 3rd axis(Z axis) shares a
common edge with X axis or with Y axis for the machine requiring double
-
edge drive. Take 0 to have Z axis and X axis share a common edge; take 1
to have Z axis and Y axis share a common edge.
Metric/English system option ——
Take 0 for metric system, which will have length parameters, speed parameters and values as well as
coordinates expressed in metric unit(mm), though it supports machining program in English system(G20). Take 1 for English system, which will have
parameters, display and coordinates expressed in English unit (inch), though it supports machining program in metric program(G21).
Attention: Please be cautious to make any change if no idea of the specific application of a parameter!
8. LIBMINIT (Library of Patterns)
8.1. LIBMINIT Setting
In addition to customized pattern module, the feature allows user to input the intended dimensions and get the expected work piece.
When entering parameter, the control system will conduct general check to the physical dimensions and prompt warning message if any error is
detected.
Notes:
It is impossible for the control system to find all the error parameters; therefore, please enter correct dimensions for parameters as much as
possible.
When the parameters are entered, the control system will drawn the pattern based on the entered parameters, which is very helpful to graph-
ic check.
In the system main menu, press [F6] to enter the LIBMINIT(Library of Patterns).
Fig. 8.1 LIBMINIT Feature( Library of Patterns)
