32
CNC System Instruction
3.3.4[F4] VIEW
It is used to test the program for any error. When this feature is selected, the pattern of machining program will be dis-
played with a cross cursor at the origin.
[S] key is used to magnify the pattern, one times by one keystroke and eight times maximum by three keystrokes. [Q]
key is used to return the pattern to original size. The display position of pattern is moveable by pressing
[↑], [↓], [←]
and/or
[→]
key.
3.3.5[F5]
KERF
This key is used to reminder input of kerf compensating width; if no necessary to compensate (usually in blanking),
simply enter 0.
3.3.6[F6]
ASSI
This key is used to enter the next lower level of menu, as shown in Fig. 3.3 below.
3.3.7. [F3] ROTATE(steel plate correcting feature)
3.3.7.1Machining at rotation angle
This feature is used when the steel plate is not positioned perfectly or the steel plate needs to rotate an angle before ma-
chining. It is allowed to use
Rotate
function along with
BEG. PT.
and
END PT.
in
Manual
mode or input the expected
angle directly. After acknowledged, the system will start the machining program at the appointed rotation angle.
Note: Counter clockwise direction is taken as positive angle.
Fig. 3.3 ASSI window
