23
a. Press [
F3
] to enter [
PLASMA
] interface.
b.
Set both the
【
ARC
-
FEEDBACK(0/1)
】
value as
“
0
”
c. Then press [
F7
] to save this set.
Note:
1
-
Row 8th and Row 9th can be adjusted according to different thickness of plate.
2
-
Row 8th
for the necessary time of piercing process;
3
-
Row 9th
for the necessary time of first piercing process. The torch is cold at the begin-
ning, so we set it a little bit longer than Row 8th.
Other values just let them be the factory set. DO NOT change it randomly.
[PLASMA] interface set
