Arbiter Systems 1200B, Руководство по эксплуатации

Страница: 203 / 218

B.11 NTP/PTP Server 185
NTP MIB Object Definitions
ˆ
ntpSysLeap : two-bit code warning of an impending leap second to be inserted in the NTP timescale.
ˆ
ntpSysStratum : indicating the stratum of the local clock. 0, unspecified; 1, primary reference (e.g.,
calibrated atomic clock, radio clock); 2 to 255, secondary reference (via NTP).
ˆ
ntpSysPrecision : signed integer indicating the precision of the various clocks, in seconds to the
nearest power of two.
ˆ
ntpSysRootDelay : the total roundtrip delay to the primary reference source at the root of the
synchronization subnet, in seconds.
ˆ
tpSysRootDispersion : the maximum error relative to the primary reference source at the root of
the synchronization subnet, in seconds. Only positive values greater than zero are possible.
ˆ
ntpSysRefId : the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1
(primary reference source), this is a pour-octet, left-justified, zero-padded ASCII string. In the case of
stratum 2 and greater (secondary reference) this is the four-octet Internet address of the peer selected
for synchronization.
ˆ
ntpSysRefTime : the local time when the local clock was last updated. If the local clock as never
been synchronized, the value is zero.
ˆ
ntpSysPoll : the minimum interval between transmitted messages, in seconds as a power of two. For
instance, a value of six indicates a minimum interval of 64 seconds.
ˆ
ntpSysPeer : the current synchronization source. Usually this will be a pointer to a structure
containing the peer variables. The special value NULL indicates there is no currently valid
synchronization source.
ˆ
ntpSysPhase : The system clock offset per selected source. (needs verification)
ˆ
ntpSysFreq : The system clock frequency correction per ntpd. (needs verification)
ˆ
ntpSysError : The current system error per ntpd? (needs verification)
ˆ
ntpSysClock : the current local time. Local time is derived from the hardware clock of the particular
machine and increments at intervals depending on the design used.
ˆ
ntpSysSystem : the type of local Operating System.
ˆ
ntpSysProcessor : the type of the local Processor.