ARAG DELTA 80, Инструкция по установке, эксплуатации и обслуживанию

Страница: 33 / 126

33
10.1.3 Flowmeter
Enter the values for the flowmeter installed on the system.
The table below indicates the values that are automatically set when selecting the flowmeter code.
If the installed flowmeter is not displayed, select
Other
and enter the relevant values.
Fig. 87
ORION FLOWMETERS WOLF FLOWMETERS
Type
Constant Minimum
flowrate
Maximum
flowrate
Type
Constant Minimum
flowrate
Maximum
flowrate
pls/l pls/gal l/min GPM l/min GPM pls/l pls/gal l/min GPM l/min GPM
4621xA0xxxx 6000 22710 0.5 0.10 10 2.6 462x2xxx 1025 3880 2.5 0.7 50 13.2
4621xA1xxxx 3000 11355 1 0.30 20 5.3 462x3xxx 625 2366 5.0 1.3 100 26.4
4621xA2xxxx 1200 4542 2.5 0.70 50 13.2 462x4xxx 250 946 10.0 2.6 200 52.8
4621xA3xxxx 600 2271 5 1.30 100 26.4 462x5xxx 132 500 20.0 5.3 400 105.7
462xxA4xxxx 300 1135 10 2.60 200 52.8 462x7xxx 60 227 40.0 10.6 800 211.3
4622xA5xxxx 150 568 20 5.30 400 105.7
4622xA6xxxx 100 378 30 7.90 600 158.5
Other
625 2366 10 2.60 200 52.8
Fig. 88
• Type
Indicate the type of flowmeter installed.
Fig. 89
• Constant
Indicate the constant of the installed flowmeter.
Fig. 90 Fig. 91
• Minimum flowrate
• Maximum flowrate
The items
Minimum flowrate
and
Maximum flowrate
can be modified
only when the option
Other
(
Type
menu
in Fig. 88) is enabled.
Enable the relevant function on the
Alarms
menu
(par. 10.1.11) if you want the computer to trigger
an alarm when, during spraying, the flowmeter
rate is outside the set range.
For the procedure to be followed when an
alarm occurs, please refer to par. 17.1 Error
messages.
ADVANCED SETUP "IMPLEMENT"
Par.
7.4
Confirm access
or data change Exit the function or
data change
Delete
selected
character
Scroll
(LEFT /
RIGHT)
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character