ARAG DELTA 80 страница 17 Скачать руководство пользователя

Страница: 17 / 126

6.9

3G Modem

The communication module allows, when a mobile phone network is available,
data exchange with Delta 80 computer.

• Modem installation

Slide out cover from modem housing, after removing the retaining screw.

Insert the modem, first position the RH side into housing

Press toward the monitor and check alignment of connectors

, fasten modem

with the screw

previously removed.

WARNING: modem incorrect positioning might cause water

seepage inside the monitor!

Fig. 25

• Insertion

Insert the SIM card making sure to orient it correctly:
the card cut edge

must be face up; push the card until it engages into place and close the slot with the

cover

MAKING SURE IT IS DULY CLOSED TO AVOID WATER SEEPAGE

• Removal

To remove the SIM card, press and immediately release the card into the slot and slide it out.

6.10

Pendrive

The pen drive may be used to exchange data with the Delta 80 computer.

Before using it make sure the pendrive is not protected.
All pendrives with up to 8 GB memory are compatible.

ACCESSORIES

Содержание DELTA 80































































































































Результаты поиска

Содержание DELTA 80

Отзывы:

Похожие инструкции для DELTA 80

Бренды по названию

Популярные бренды

ARAG DELTA 80, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание DELTA 80

Отзывы:

Похожие инструкции для DELTA 80

Бренды по названию

Популярные бренды