ARAG bravo series 400S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 60 / 68

60
"JOB FUNCTIONS" - F7 NEW AB
14.6
F7
New AB
Saves two points A and B on the field, which Navigator uses to draw a line that will act as a
reference track (
T0
, Fig. 209) for the current job.

1

2

3
Fig. 207
1
In the guidance screen, press
Func
.
2
Drive along the stretch you wish to use as a reference for the job.
Press
F7
to enable the function: the request
Mark A?
will appear on the display. (Fig. 207).
3
Press
OK
. The display shows the message
Drive!
(Fig. 208).
4
Keep driving, when you have reached the minimum distance (30 m / 95.5 ft), the request
Mark B?
will appear on the display. Press
OK
.
The reference track
T0
and all tracks to be followed during the job will appear on the display (Fig. 209).
We recommend marking points
A
and
B
while the machine is moving, at both ends of a straight line that is as long
as possible: the longer the line marked by points
A
and
B
, the lower the error caused by any deviations of the
machine itself.
A
Fig. 208

4
T0
B
Fig. 209
When this function is used, Navigator deletes the previous reference track
T0
(if present), and prompts the operator to save two NEW points
A
and
B
on the field,
which create a NEW reference track.
WARNING:
Points
A
and
B
can be marked only when the vehicle is moving.
The previous track
T0
cannot be restored.
30 m / 95.5 ft
Par.
7.4
Exit the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
increase /
decrease Scroll
(UP /
DOWN) Enter
selected
character